Bob's Blog

About Bob

Crown Molding

One very nice and custom option for the solid Newport cover is to delete the Alumawood “rafter tails” and install a PVC or other exterior grade crown molding. Crown molding is available from local hardware or lumber supply stores.

This crown molding was attached through the back side of the Alumawood 2×6 fascias with long screws, an exterior grade construction adhesive was also used. Paint codes are available from alumawood.com to match all existing Alumawood covers.

Another option not used in this picture is to delete the down spouts and use Alumawood scuppers. With the scupper option you don’t have the down spout conflicting with the elegant round columns.

This entry was posted on Monday, November 5th, 2007 at 11:27 am and is filed under Tip & Ideas. You can follow any responses to this entry through the RSS 2.0 feed. You can leave a response, or trackback from your own site.